TERRACE
RELATED WATERPROOFING WORK CAN BE DONE BY USING MEMBRANE.
For Terrace Waterproofing we are offering
the Membrane Waterproofing system. The system shall include.
1. Surface Preparation:
Terrace surface shall be cleaned. 2.
Primer Coat: Bituminous Primer shall be applied. 3.
Laying of Membrane: Membrane shall be laid by hot torching
method on the terrace up to the Parapet top. 4.
Pond Testing: The entire area shall be Pond-tested for
72 hrs, to check leakages if any, by means of storing
water.
If client desires, Aluminium Paint shall
be applied over the Membrane, at extra cost for Heat Reflection.
CHARACTERISTICS
OF MEMBRANE:
Membranes are flexible.
It can be laid on the Existing
Surface. No breaking is required.
There is no possibility of damage
to the existing structure, since it does not involve
removal of Existing Waterproof System.
It does not add dead weight to
the slab.
Membranes are designed to withstand
heat without sagging.
Life of Membranes (3 mm. thick)
is minimum 5 years to 10 years.
TYPES
OF MEMBRANES
HOT
APPLICATION MEMBRANES
These membranes are fixed on
the cleaned terrace by Hot Torching Method.
These Membranes are bitumen
based waterproofing membranes, thickness varying from
3mm. to 4mm. Manufactured with APP plastomeric compounds
with Polyester or Glass Fibre Reinforcement. This compound
provides following properties to membrane.
Great toughness
Good low temperature pliability
Great resistance against atmospheric agents and
a maximum guarantee of durability
High softening point; these are “hard”
membranes, with high temperature resistance and easy
application even in hot weather
High tensile strength
Maximum puncturing strength (Static & Dynamic)
Great tear strength
Good dimensional stability
COLD
APPLICATION MEMBRANES
These membranes are Self Adhesive
Membranes & there is no need of Hot Torching.
These are the SBS bitumen based
membranes with a high mechanical performance polyethylene
film finish on upper side and easily removable silicone
film on the underside.
The upper finish acts as both
reinforcement & non – stick film. It is very
stable, 100 – micra high density cross –
terminated polyethylene film, with great tear strength
and magnificent mechanical properties.
These membranes are very easy to apply & are
applied rapidly, cleanly and with no need of for special
tools.
Easy bonding to substrate, after previously applying
a fast – drying primer
Overlaps are carried out by simple contact and
pressure
Its flexibility easily absorbs substrate movement
For want of specific requirements
of the Clients like Architects, Builders etc. we can also
offer the following Membranes of NEW ERA.
